Stihl TS 420 Gas Saw

$1,499.00 $1,599.00

Features

Water Connection - Water connection with shut-off valve and quick connector.
Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
Semi-Automatic Belt Tensioning - With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings
X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.

Features

Water Connection - Water connection with shut-off valve and quick connector.
Ergonomic Grip - The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
STIHL ElastoStart™ - The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
Anti-Vibration System - STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
Bayonet-Style Filler Cap - Includes retainer for easy use, even with gloves on.
Semi-Automatic Belt Tensioning - With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings
X2 Air Filtration System - The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
IntelliCarb™ Compensating Carburetor - The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.

A Related Offer to Check Out

If you're planning to purchase diamond blades, be sure to check out another great deal: Buy fourteen (14) qualifying 14-inch diamond blades and receive a FREE industry-leading concrete saw of your choice. It's a great opportunity to stock up on contractor-trusted cutting tools while adding another professional-grade saw to your fleet. Explore the offer to see qualifying blades and complete promotion details.

FREE GAS SAW DEAL

Built for Professional Cutting Applications

The TS 420 is engineered to handle the demanding conditions found on today's construction sites. It provides dependable cutting performance across a variety of materials.

Common applications include:

Concrete cutting
Asphalt cutting
Masonry work
Brick and block cutting
Utility construction
Road and highway maintenance
Infrastructure projects
Site preparation
Demolition work

Its versatility makes it a valuable addition to contractors who need one saw capable of handling multiple jobsite applications.

Designed for Comfort and Productivity

Long days on the job require equipment that's comfortable to operate. The STIHL TS 420 features a lightweight, well-balanced design, an anti-vibration system, and an ergonomic handle layout that help improve control and reduce fatigue during extended use. It also features STIHL's X2 air filtration system for longer filter life and reduced maintenance, along with a fuel-efficient engine and integrated water connection for dust suppression during wet cutting.

The result is a professional cut-off saw that's built to help crews stay productive throughout the workday.

A Trusted Choice for Contractors

Contractors across multiple industries rely on the STIHL TS 420 because it consistently delivers dependable performance in demanding environments.

This saw is an excellent choice for:

Utility contractors
Concrete cutting professionals
Excavation companies
Municipal public works departments
Road construction crews
General contractors
Masonry contractors
Infrastructure contractors

The TS 420 has earned its reputation as one of the industry's benchmark cut-off saws.

Why Contractors Choose Diamond Discs International

Diamond Discs International is the infrastructure industry's trusted supplier of professional-grade diamond blades, power equipment, safety products, and construction solutions.

Customers choose DDI because we provide industry-proven products, same-day shipping on in-stock items, same-day pickup availability, large local inventory, knowledgeable account support, and contractor-focused service.

Our goal is to help customers get the right products quickly, keep projects moving forward, and maximize value from every purchase.